Free Shipping on Orders over $10 Great Prices on Great Felco Tools

Parts for Felco 100 cut-and-hold rose pruner, bypass, (F100)

Felco 100 cut-and-hold rose pruner, bypass,

These are all the available parts for the Felco 100 cut-and-hold rose pruner, bypass, (F100).

We sell only genuine Felco brand replacement parts. Only Felco parts are sure to fit your Felco tool.

Felco pruners last forever, but years of hard use and repeated sharpening will eventually wear down even the hardest steel blade. If your blades are chipped or cracked, your pruners no longer close all the way to the tip or you can hardly tell that there was a wire-notch at the back of the blade, then it is time for a replacement blade. You won't believe the difference it makes. Made in Switzerland.
Our low price: $21.39 each
2 or more: $20.92 each
5 or more: $20.44 each
10 or more: $19.97 each
Usually ships the same or next business day
Picture of  100-3
Made in Switzerland.
Our low price: $24.23 each
2 or more: $23.69 each
5 or more: $23.15 each
10 or more: $22.61 each
Usually ships the same or next business day
Picture of  100-4
Are your pruners listless and unresponsive? Do they open slowly or not at all? Put the spring back in your pruners. Pruner springs should be replaced every year for best performance. Made in Switzerland. Contains two springs (2-11).
Our low price: $6.48 each
2 or more: $6.34 each
5 or more: $6.19 each
10 or more: $6.05 each
Usually ships the same or next business day
Picture of  2-91
Contains center bolt (6-8) and nut (2-9), locking segment (2-16) and screw for locking segment (6-7). Made in Switzerland.
Our low price: $13.61 each
2 or more: $13.31 each
5 or more: $13.00 each
10 or more: $12.70 each
Usually ships the same or next business day
Picture of  6-90
Worn or hardened shock absorbers can make pruning a pain in the wrist. For pain-free pruning replace your shock absorbers at least once a year. Contains 4 upper (2-18) and 6 lower (2-20) shock absorbers. Fits all Felco pruners that have shock absorbers. Made in Switzerland.
Our low price: $9.40 each
2 or more: $9.19 each
5 or more: $8.98 each
10 or more: $8.77 each
Usually ships the same or next business day
Picture of  2-93
Includes bushing (2-10), blade pins, bumper and edging ring (2-19), thumb catch (2-12), spring washer (2-13), screw for catch(2-14) and non-slip rubber coating. Made in Switzerland.
Our low price: $25.60 each
2 or more: $25.03 each
5 or more: $24.46 each
10 or more: $23.89 each
Usually ships in 3 business days
Picture of  100-1
Made in Switzerland.
Our low price: $16.78 each
2 or more: $16.40 each
5 or more: $16.03 each
10 or more: $15.66 each
Usually ships the same or next business day
Picture of  11-2
Requires riveting. Used as a last resort to replace the cutting blade pins if the pins are lost or damaged. Once the cutting blade is riveted on, future blade replacement will require removing and replacing rivets. Also used on older Felco model 2 pruners to attach the cutting blade at the factory. If your pruner is old enough to vote you probably need three of these along with a new blade. Made in Switzerland.
Our low price: $0.92 each
2 or more: $0.90 each
5 or more: $0.88 each
10 or more: $0.86 each
Usually ships the same or next business day
Picture of  2-5
Made in Switzerland.
Our low price: $6.16 each
2 or more: $6.02 each
5 or more: $5.88 each
10 or more: $5.75 each
Usually ships the same or next business day
Picture of  6-8
Did you let the locking segment stay loose too long? That’s how you lose the lock nut. Don’t freak out - buy a new nut and save your trusty tool. Made in Switzerland.
Our low price: $6.80 each
2 or more: $6.65 each
5 or more: $6.50 each
10 or more: $6.35 each
Usually ships the same or next business day
Picture of  2-9
Made in Switzerland.
Our low price: $5.35 each
2 or more: $5.23 each
5 or more: $5.11 each
10 or more: $4.99 each
Usually ships the same or next business day
Picture of  2-10
While replacing the thumb catch, make sure you replace the spring washer too. It holds the catch still so it stays locked when locked and stays unlocked when in use. This part may not fit older model pruners.
Our low price: $3.19 each
2 or more: $3.12 each
5 or more: $3.04 each
10 or more: $2.97 each
Usually ships the same or next business day
Picture of  2-12
Does your thumb catch swing freely, locking your pruner during use? There's an easy solution: You need a new spring washer. Don't over-tighten the screw, fix it right: replace the spring washer.
Our low price: $1.26 each
2 or more: $1.23 each
5 or more: $1.20 each
10 or more: $1.18 each
Usually ships the same or next business day
Picture of  2-13
While replacing the this screw, make sure you replace the spring washer too. It holds the catch still so it stays locked when locked and stays unlocked when in use. This part may not fit very old Felco pruners.
Our low price: $1.62 each
2 or more: $1.58 each
5 or more: $1.55 each
10 or more: $1.51 each
Usually ships the same or next business day
Picture of  2-14
This kit has all the parts that commonly wear out on the F100 pruner. Revamp you F100 to work like new: comfy cushion, clean, un-notched catch plate and a tight, clean locking system. Contains catch plate (100-15), thumb catch (2-12), spring washer (2-13) and screw (2-14); and shock absorbers (2-18 and 2-20).
Our low price: $12.80 each
2 or more: $12.51 each
5 or more: $12.23 each
10 or more: $11.94 each
Usually ships the same or next business day
Picture of  100-92
Made in Switzerland.
Our low price: $2.95 each
2 or more: $2.89 each
5 or more: $2.82 each
10 or more: $2.76 each
Usually ships the same or next business day
Picture of  2-16
Made in Switzerland.
Our low price: $0.97 each
2 or more: $0.95 each
5 or more: $0.93 each
10 or more: $0.91 each
Usually ships the same or next business day
Picture of  2-19
Made in Switzerland.
Our low price: $3.40 each
2 or more: $3.33 each
5 or more: $3.25 each
10 or more: $3.18 each
Usually ships the same or next business day
Picture of  6-6
Made in Switzerland.
Our low price: $3.40 each
2 or more: $3.33 each
5 or more: $3.25 each
10 or more: $3.18 each
Usually ships the same or next business day
Picture of  6-7
Contains anvil blade hold (100-36), cutting blade hold (100-37) and 4 screws (30-6).
Our low price: $20.66 each
2 or more: $20.20 each
5 or more: $19.75 each
10 or more: $19.29 each
Usually ships the same or next business day
Picture of  100-95
Over time the rubber coating on your pruner handles tends to get chipped, worn and torn. Spruce up the look and give yourself a firmer grip. Remove the old coating and slide on a new one. Use warm soapy water to help slide the new coating on smoothly. A little acrylic glue or epoxy around the edges will keep the new coating permanently in place. Made in Switzerland.
Our low price: $6.34 each
2 or more: $6.20 each
5 or more: $6.05 each
10 or more: $5.91 each
Usually ships the same or next business day
Picture of  2-35
Over time the rubber coating on your pruner handles tends to get chipped, worn and torn. Spruce up the look and give yourself a firmer grip. Remove the old coating and slide on a new one. Use warm soapy water to help slide the new coating on smoothly. A little acrylic glue or epoxy around the edges will keep the new coating permanently in place. Made in Switzerland.
Our low price: $6.34 each
2 or more: $6.20 each
5 or more: $6.05 each
10 or more: $5.91 each
Usually ships the same or next business day
Picture of  2-36
Used for adjustment and maintenance of Felco pruners and loppers. Just the right shape for tightening or loosening the center nut. The correct thickness for fitting the screw slots on older models. On newer models use the handy hexagon-shaped cut-outs for slip-free adjustment of all the nuts and bolts on your Felco pruner or lopper.
Our low price: $0.79 each
2 or more: $0.77 each
5 or more: $0.76 each
10 or more: $0.74 each
Usually ships the same or next business day
Picture of  2-30