Free Shipping on Orders over $10 Amazing Tools, Amazing Site, Amazing Prices

Parts for Felco pruner F12, small hand, bypass, rotating handle (F12)

Felco pruner F12, small hand, bypass, rotating handle

These are all the available parts for the Felco pruner F12, small hand, bypass, rotating handle (F12).

We sell only genuine Felco brand replacement parts. Only Felco parts are sure to fit your Felco tool.

Mighty Felco pruners seem indestructible, but year after year of hard use and repeated sharpening eventually wears down even the hardest steel blade. If your blade is chipped or cracked, your pruners no longer close all the way to the tip or you can hardly tell that there was a wire-notch at the back of the blade, then it is time for a replacement blade. You won't believe the difference it makes. Made in Switzerland.
Our low price: $16.06 each
Usually ships the same or next business day
Limited quantity available.
Picture of  6-3
Genuine Felco replacement anvil blade for the Felco 6 and 12 pruners. Includes 6-6 screw. Made in Switzerland.
Our low price: $17.17 each
Usually ships the same or next business day
Limited quantity available.
Picture of  6-4
We recommend replacing the spring in your pruners at least once every year. If your pruner doesn't open like it used to, it's time for a new spring. Made in Switzerland. Contains two springs (6-11).
Our low price: $5.18 each
Usually ships the same or next business day
Limited quantity available.
Picture of  6-91
Contains center bolt (6-8) and nut (2-9), locking segment (2-16) and screw for locking segment (6-7). Made in Switzerland.
Our low price: $13.61 each
Usually ships the same or next business day
Limited quantity available.
Picture of  6-90
Made in Switzerland.
Our low price: $16.78 each
Usually ships in 3 business days
Limited quantity available.
Picture of  12-2
If the lock nut on your Felco model 6, 11, 12 or 100 is allowed to loosen up, a hard cut can bend or snap the center bolt. Don’t let that happen! If it does happen to you, your valued pruner can be saved. Get a new center bolt here. Made in Switzerland.
Our low price: $6.65 each
Usually ships the same or next business day
Limited quantity available.
Picture of  6-8
Did you let the locking segment stay loose too long? That’s how you lose the lock nut. Don’t freak out - buy a new nut and save your trusty tool. Made in Switzerland.
Our low price: $4.54 each
Usually ships the same or next business day
Limited quantity available.
Picture of  2-9
Made in Switzerland.
Our low price: $3.56 each
Usually ships the same or next business day
Limited quantity available.
Picture of  2-10
While replacing the thumb catch, make sure you replace the spring washer too. It holds the catch still so it stays locked when locked and stays unlocked when in use. This part may not fit older model pruners.
Our low price: $2.12 each
Usually ships the same or next business day
Limited quantity available.
Picture of  2-12
Does your thumb catch swing freely, locking your pruner during use? There's an easy solution: You need a new spring washer. Don't over-tighten the screw, fix it right: replace the spring washer.
Our low price: $0.50 each
Usually ships the same or next business day
Limited quantity available.
Picture of  2-13
While replacing the this screw, make sure you replace the spring washer too. It holds the catch still so it stays locked when locked and stays unlocked when in use. This part may not fit very old Felco pruners.
Our low price: $0.65 each
Usually ships the same or next business day
Limited quantity available.
Picture of  2-14
This seemingly simple part is the heart of your pruner. It acts as a washer for the center bolt and nut and also for the locking segment. It is held fast by the screw for locking segment and has a notch where the catch is caught. Without this simple, flat plate your pruners will not function. Three cheers for the catch plate! Made in Switzerland.
Our low price: $2.12 each
Usually ships the same or next business day
Limited quantity available.
Picture of  2-15
This small but important part stops the center bolt from turning. This keeps your pruner blades set to the proper tension. Made in Switzerland.
Our low price: $1.48 each
Usually ships the same or next business day
Limited quantity available.
Picture of  2-16
This ring holds the bumper in place. Do not remove this ring. It is very difficult to replace. Putting in a new edging ring requires heating the handle of the pruner and should only be done by a professional. Made in Switzerland.
Our low price: $0.65 each
Usually ships the same or next business day
Limited quantity available.
Picture of  2-19
Made in Switzerland.
Our low price: $2.27 each
Usually ships the same or next business day
Limited quantity available.
Picture of  6-6
This screw holds the locking segment in place on the Felco models 6, 11, 12 and 100. Loosen it to allow the locking segment to move and the center bolt to turn when making a tension adjustment of the blades. TIghten it again when the pruner is properly adjusted. Made in Switzerland.
Our low price: $2.27 each
Usually ships the same or next business day
Limited quantity available.
Picture of  6-7
Made in Switzerland.
Our low price: $33.05 each
Usually ships the same or next business day
Limited quantity available.
Picture of  7-22
Used for adjustment and maintenance of Felco pruners and loppers. Just the right shape for tightening or loosening the center nut. The correct thickness for fitting the screw slots on older models. On newer models use the handy hexagon-shaped cut-outs for slip-free adjustment of all the nuts and bolts on your Felco pruner or lopper.
Our low price: $0.79 each
Usually ships the same or next business day
Limited quantity available.
Picture of  2-30