Free Shipping on Orders over $10 Quality is Important: Use Felco Tools

Parts for Felco pruner 160S, for small hands, bypass, composite fiber handles (F160S)

Felco pruner 160S, for small hands, bypass, composite fiber handles

These are all the available parts for the Felco pruner 160S, for small hands, bypass, composite fiber handles (F160S).

We sell only genuine Felco brand replacement parts. Only Felco parts are sure to fit your Felco tool.

Made in Switzerland.
Our low price: $16.52 each

Usually ships the same or next business day

Picture of  160S-4
Felco pruners last forever, but years of hard use and repeated sharpening will eventually wear down even the hardest steel blade. If your blades are chipped or cracked, your pruners no longer close all the way to the tip or you can hardly tell that there was a wire-notch at the back of the blade, then it is time for a replacement blade. You won't believe the difference it makes. Made in Switzerland.
Not available at this time.
Picture of  160S-3
Are your pruners listless and unresponsive? Do they open slowly or not at all? Put the spring back in your pruners. Pruner springs should be replaced every year for best performance. Made in Switzerland. Contains two springs (2-11).
Not available at this time.
Picture of  2-91
Requires riveting. Used as a last resort to replace the cutting blade pins if the pins are lost or damaged. Once the cutting blade is riveted on, future blade replacement will require removing and replacing rivets. Made in Switzerland.
Not available at this time.
Picture of  5-5
Made in Switzerland.
Not available at this time.
Picture of  160-6
Made in Switzerland.
Not available at this time.
Picture of  160-7
Contains center bolt (160-8) and nut (160-9).
Not available at this time.
Picture of  160-94