Felco Tools Information and Reference Quality is Important: Use Felco Tools

Parts for Felco lopper F210-50A, 20 inches, curved edge, metal handles (F210A-50)

Felco lopper F210-50A, 20 inches, curved edge, metal handles

These are all the available parts for the Felco lopper F210-50A, 20 inches, curved edge, metal handles (F210A-50).

We sell only genuine Felco brand replacement parts. Only Felco parts are sure to fit your Felco tool.

Years of daily sharpening (you sharpen every day, right?) can eventually wear down even the toughest steel blade. Always use a genuine Felco replacement blade for your lopper.
Picture of  210-3
Restore your loppers to bouncy, cushioned youth and save your wrists at the same time. Lopper bumpers should be replaced every 2 to 3 years.
Picture of  20-93
Fits all Felco loppers. Contains center bolt (20-8) and nut (20-9).
Picture of  20-94
Used for adjustment and maintenance of Felco pruners and loppers. Just the right shape for tightening or loosening the center nut. The correct thickness for fitting the screw slots on older models. On newer models use the handy hexagon-shaped cut-outs for slip-free adjustment of all the nuts and bolts on your Felco pruner or lopper.
Picture of  2-30
This small but important part stops the center bolt from turning. This keeps your pruner blades set to the proper tension. Made in Switzerland.
Picture of  2-16
Opposite the 210-3 cutting blade, and matching its curve, the hook-shaped anvil blade holds the branch for cutting. Anvil blades should never be sharpened.
Picture of  210-4
Be ready for anything. This pocket-size kit has everything you need for minor repairs to your Felco lopper. Contains two screws (20-6), two nuts (20-7), locking segment (2-16) and locking segment screw (20-11).
Picture of  20-92
Red handle grips (set of 2) for F200 and F210 series (200-35)
Made in Switzerland.