Free Shipping on Orders over $10 Great Gardeners Use Felco Tools

Felco Parts Sets: Handy and Economical

Felco parts are available in handy sets - it's an economical way to buy genuine Felco replacement parts that often need to be replaced together.

You might want to see our Felco replacement springs, look at our selection of Felco blades or our handy Felco replacement parts index.

Contains center bolt (5-8) and nut (4-9). Made in Switzerland.
Picture of  5-94
Contains center bolt (6-8) and nut (2-9), locking segment (2-16) and screw for locking segment (6-7). Made in Switzerland.
Picture of  6-90
Squeezed too hard and broke the pivot bolt on your Felco anvil pruners? Relax, strong-arm. This set will get your F-30 or F-31 anvil pruners working again. Contains center bolt (30-8), nut (30-9) and washer (30-25). Made in Switzerland.
Picture of  30-90
If your Felco anvil pruners are not locking tightly or are locking when in use, this is the solution. Everything you need to correct locking problems for the F-30 and F31 Felco anvil pruners. Contains thumb catch (30-12), spring washer (2-13) and screw (2-14). Made in Switzerland.
Picture of  30-92
Restore your loppers to bouncy, cushioned youth and save your wrists at the same time. Lopper bumpers should be replaced every 2 to 3 years.
Picture of  20-93
Fits all Felco loppers. Contains center bolt (20-8) and nut (20-9).
Picture of  20-94
Contains center bolt (2-8) and nut (2-9), locking segment (2-16) and screw for locking segment (2-17). Made in Switzerland.
Picture of  2-90
Contains center bolt (4-8) and nut (4-9). Made in Switzerland.
Picture of  4-90
Contains center bolt (7-8) and nut (2-9), locking segment (2-16) and screw for locking segment (7-7). Made in Switzerland.
Picture of  7-90
Give your beloved Felco pruner a tune-up. This kit has everything you need to spruce up your pruner and keep it working smoothly for years to come. Contains catch plate (2-15); thumb catch (2-12), spring washer (2-13) and screw (2-14); upper, flat shock absorber (2-18) and lower, rounded shock absorber (2-20). Made in Switzerland. The 2-14 screw may not fit older pruners.
Picture of  2-92
Worn or hardened shock absorbers can make pruning a pain in the wrist. For pain-free pruning replace your shock absorbers at least once a year. Contains 4 upper (2-18) and 6 lower (2-20) shock absorbers. Fits all Felco pruners that have shock absorbers. Made in Switzerland.
Picture of  2-93
This kit has all the parts that commonly wear out on the F100 pruner. Revamp you F100 to work like new: comfy cushion, clean, notched (half-open lock) catch plate and a tight, clean locking system. Contains catch plate (100-15), thumb catch (2-12), spring washer (2-13) and screw (2-14); and shock absorbers (2-18 and 2-20).
Picture of  100-92
Be ready for anything. This pocket-size kit has everything you need for minor repairs to your Felco lopper. Contains two screws (20-6), two nuts (20-7), locking segment (2-16) and locking segment screw (20-11).
Picture of  20-92
Restore your loppers to bouncy, cushioned youth and save your wrists at the same time. Lopper bumpers should be replaced every 2 to 3 years.
Picture of  21-93
Contains center bolt (160-8) and nut (160-9).
Picture of  160-94